Wi-Fi Direct Mode Setup
You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point.
1 | Epson product |
2 | Computer with a wireless interface |
3 | Other wireless device |
Your product automatically selects one of these modes to communicate with your computer or device:
- Access point mode
- If your product is not already connected to a wireless network, it enters access point mode and the product itself acts as the network access point for up to 4 devices. When operating in this mode, your product displays an AP connection symbol on the LCD screen.
- Peer-to-peer mode
- If your product is already connected to a wireless network, it enters peer-to-peer mode and disconnects from any other networks. This also disables any other product features requiring access to the Internet. When operating in this mode, your product displays a Direct or D connection symbol on the LCD screen. Note: To disconnect a peer-to-peer mode connection, release the connection to your product from your computer or other device. Your product will reconnect to the previously used network.
Parent topic: Wi-Fi or Wired Networking
'메모' 카테고리의 다른 글
삼성복합기(프린터) 구글 클라우드 프린트에 프린터 연결하기...펌 (0) | 2017.01.22 |
---|---|
epson fax to pc...펌 (0) | 2017.01.22 |
생수통 녹조...펌 (0) | 2017.01.17 |
ipTIME 공유기에서 네트워크 프린터(usb로 연결) 설정하기...펌 (0) | 2017.01.16 |
ssid, 비번, 채널 동일하게 하면 roaming잘됨...펌 (0) | 2017.01.14 |